Use tungsten carbide burrs on hard materials including steel, aluminum and iron, all types of stone, ceramic, porcelain, hard wood, acrylics, fibreglass and reinforced plastics. When suited for soft metals such as gold, platinum and silver, carbide burrs are fantastic because they last for a long period without having breaking or chipping.
Different cuts of carbide burrs will be suitable for sure materials.
Ways to use SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools like die grinders, pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools like a Dremel.
Carbide burrs are widely used for metalworking, tool making, engineering, model engineering, wood carving, jewelry creation, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are employed from the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you undertake?
Single cut (one flute) carbide burrs possess a right handed (up cut) spiral flute. Single cut can be used with stainless, hardened steel, copper, cast iron and ferrous metals and will remove material quickly using a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy eliminating material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel as well as all non-metal materials like stone, plastics, real wood and ceramic. This cut has more cutting edges and will remove material faster. Double cut also referred to as Diamond Cut or Cross Cut (2 flutes cut across one another) and definately will leave a smoother finish than single cut due to producing smaller chips while they cut away the information. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most popular and work for most applications.
Medium- light eliminating material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed should you use?
The pace from which you utilize your carbide burr within your rotary tool will depend on the information you’re deploying it on as well as the contour being produced but it’s safe to assume you do not need over 35,000 RPM. In the event the burs are chipping easily this might be because of the speed being not quick enough. It’s ideal to start the bur off slow, helping the speed as you go along. High speeds minimizes clogging in the flutes of your carbide burs.
Like all drill bits and burrs, allow the burr perform work and apply simply a little pressure, otherwise the cutting edges in the flutes will chip away or become smooth too rapidly, reducing the duration of your burr.
Check out about SB-3 Carbide Burrs just go to this net page