Carbide Burrs (also referred to as Rotary Burrs) can be used for cutting, shaping, grinding as well as the removal of sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs be used on?
Carbide burrs can be used on many materials. Metals including steel, aluminum and cast iron, all kinds of wood, acrylics, fibreglass and plastics. When applied to soft metals for example gold, platinum and silver, carbide burrs are ideal since they can last a very long time without having chipping or breaking.
Steel, Carbon Steel & Metal
Certain
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Carbon fibre Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood
Different cuts of carbide burrs will likely be suitable to certain materials, start to see the next point below to discover more on the various cuts.
Exactly what do You employ Carbide Burrs In?
Ideally carbide burrs are widely-used in Air Tools i.e Die Grinders, Pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools like a Dremel.
Only use a handpiece that runs true i.e without having wobble.
Who Uses Carbide Burrs?
Carbide burrs are traditionally used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And therefore are used in the aerospace, automotive, dental, metal sculpting, and metal smith industries to call only a few.
2. Carbide Burrs Commonly Appear in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs possess a right handed (Up cut) spiral flute. These usually are combined with stainless, hardened steel, copper, cast iron, and ferrous metals and may remove material quickly using a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removing material
Milling
Deburring
Cleaning
Creates long chips
Double cut carbide burrs tend to be utilized on ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials for example plastics and wood. They’ve got more cutting edges and will remove material faster. Double cut are sometimes referrred to as Diamond Cut or Cross Cut (2 flutes cut across the other) leaves a smoother finish than single cut because of producing smaller chips while they cut away the pad. Use for medium-light stock removal, deburring, finishing and cleaning. A dual cut carbide burr is the most popular cut and may look at you through most applications.
Medium- light elimination of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
3. What Speed or RPM the use of your Carbide Burrs?
The pace at which you utilize your carbide bur within your rotary tool depends on the pad you use it on as well as the contour being produced but it’s pretty sure you don’t need to exceed speeds of 35,000 RPM.
4. Usually do not Apply A lot of Pressure
As with all drill bits and burrs, allow burr do the work and apply simply a little pressure otherwise the cutting edges from the flutes will chip away or become smooth too quickly, minimizing the life of your burr.
5. Carbide Burrs are not as easy Than HSS Burrs
Our Carbide Burrs are machine ground from your specially chosen grade of carbide. Due to the extreme hardness in the Tungsten Carbide they are often applied to much more demanding jobs than HSS (Very fast Steel).
Carbide Burrs also perform better at higher temperatures than HSS to help you run them hotter, as well as longer.
HSS burrs will start to soften at higher temperatures so carbide is usually a better option for very long term performance.
What Are The Advantages of Tungsten Carbide Burrs?
Durability
Use for long production runs
High stock removal
Ideal for using on many hard and tough materials
Ideal for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
6. Keep The Carbide Burr Moving around
When using your carbide burr never ensure that is stays still for too long because this prevents the burr from digging and jabbing in your material causing unsightly marks and roughness.
End by using an ‘up’ stroke for any smoother finish to your work.
Stay Safe:
Always ensure your burr shank is well inserted in your collet and clamped down tightly
Keep pressure light and make the bur moving, focusing on the greatest material first
Make sure your tasks are secured tightly to your workbench
Don’t snag or jam your burr in your work
Wear eye protection at the least, but even better work with a full shield to your face
More information about SF-1 Carbide Burrs check out this net page