Carbide burrs are tools utilized for deburring most hard materials like ceramics, stone, steel, aluminum, plastics and hardwood. They feature precision, and may be used in cutting, shaping, grinding and chamfering hard materials.
Carbide burrs can be used on the selection of materials including metals (including Steel aluminum and certain) and many types of types of wood. You can use it on acrylics, fiberglass and plastics too. Carbide burrs can last for a long time without chipping or breaking to ensure it’s so good for their services on soft metals like gold,platinum and silver.
Do you know the Advantages of Carbide Burrs Weighed against HSS Burrs?
Weighed against HSS, Carbide Burrs are much harder.
The Tungsten Carbide is extremely hard in order to supply in wider range of work than HSS (Broadband Steel).
HSS can’t be as good as carbide burrs if they are at temperature. Carbide Burrs can bear hotness and will run for time.
Carbide won’t soften at warm but HSS burrs is opposite. There’s no question that carbide is the perfect choice.
Using Carbide Burs:
To get more stability, insert the accessory bit into the oral appliance then back it slightly before tightening on the collet nut or keyless chuck.
Do not use these for drilling holes or enlarging holes that are below twice the diameter from the cutter. The tungsten carbide surface can easily catch the medial side of the hole and break the part.
Use higher speeds for hardwoods, slower speeds for metals and slow speeds for plastics (to avoid melting at contact point).
Start at the lower speed. Then increase towards the speed which gives the most favourable results.
Usually do not apply excessive pressure. It can slow down the spindle and chip cutting edges. Just let the bur perform cutting.
Utilize sides from the cutter for effective cutting. The end cuts poorly and can break being forced.
Never in-capsulate the bur from the cut. If chattering occurs, increase speed.
When you use aluminium and magnesium, consider some type of lubricant, wax or tallow, since it may help avoid the flutes from loading or packing.
Carbide burs, if used the appropriate way, will outperform HSS burs by 50
To learn more about SD-51 Carbide Burrs you can check this popular site