1. Which are the CRITERIA?
Do you as an example need to fit Edwardian-type cast-iron radiators? Or do you wish to fit radiators at the lowest possible cost? Or perform the radiators ought to comply with some type of design need – such as being flush using the floor?
2. POSITIONING
It once was considered best practice to put radiators below windows, because they were deemed being cold spots. However, if the property is double-glazed, the radiators may be positioned to match design and space needs since areas all around the windows will be almost as warm as the other walls in the house.
3. WINDOWS
Be wary about placing radiators opposite a window – there exists a possibility that they can draw cold air from your window and hang up flu airflow that cuts throughout the room. If at all possible, attempt to position the radiators at right angles to the window one of the side walls.
4. SIZE & NUMBER
The development of double-panel and finned radiators implies that you’ll be able to slow up the size and amount of radiators in a room to the minimum. This is a good option if the room is long and narrow.
5. CALCULATIONS
To some large degree, the amount and design of radiators relates to the size and style and the space being heated, so calculate the cubic capacity in the rooms you want to heat. Find out the floor area by multiplying the width from the room by its length, after which multiply this by its height. For example, to get a room 3m wide, 4m long and 2m high, the sum is 3m x 4m = 12sqm x 2m = 24cu m. You will have to heat 24cu m. Use a Mears wheel to calculate the amount of radiators required.
6. UNDERFLOOR HEATING
Underfloor heating is costly to put in, though the water within the system must not be heated towards the same high temperatures just like a radiator installation, so running cost is lower.
7. INSTALLING UNDERFLOOR HEATING
Underfloor heating can be placed in existing houses in many different locations – under concrete slabs, or suspended under wooden floors and/or in ceiling spaces.
8. TRENCH HEATERS
These are simply small radiators that are occur trenches in order that they are flush with the floor. They are a good option when you have floor-to-ceiling windows, and want to achieve a clean minimal look
9. CONVECTOR HEATERS
Wet boiler system convector heaters are a unique option, and extremely good if you want instant heating. The heaters include one or more finned pipes, rather like a larger form of a motor vehicle radiator. Doing his thing, the cold air goes through the fins, heats up and rises, with all the effect that hot air comes out of the top of the radiator and cold air enters towards the bottom. Some models are fitted with electric fans and dampers that allow you to turn the heatup or down to suit your needs.
10. SKIRTING RADIATORS
These are generally an excellent choice when you need to accomplish a good, all-round background heat in a room that’s also heated by an open fire. Skirting radiators are plentiful in kit form.
More details about zamena batarey v kvartire go to this popular internet page.